How to Install Printer Driver Safely on Windows and Mac

You’ve connected the printer, your computer can see it, and the document still won’t print. A search for a driver brings up download buttons, update utilities and software packages that all look plausible. Choosing the wrong one can leave you with another broken print queue, or software you shouldn’t have installed.

Knowing how to install a printer driver starts before you click Download. Identify the printer and computer correctly, check the software’s source and permissions, then use the simplest supported installation method. You don’t need a full manufacturer software suite just to print a document.

Table of Contents

Find the Right Driver Source for Your Printer

Collect three facts before downloading anything: the exact printer model, your computer’s operating system and architecture, and how the printer connects. These determine which driver you need and whether a separate download is necessary.

Read the manufacturer and model from the label on the printer itself. Include any letters or suffixes, because a similar-looking model in the same range isn’t necessarily compatible. Then record whether you’re using USB, Wi-Fi or Ethernet, and whether the printer belongs directly to your computer or uses a shared office queue.

Identify your computer before choosing software

On Windows, open Settings > System > About. Under Windows specifications, note your Windows version; under Device specifications, check System type. Microsoft’s printer compatibility guidance says the download must match the Windows release, such as Windows 10 or Windows 11, and system type, such as 32-bit or 64-bit.

If System type identifies an ARM-based processor, don’t assume a conventional Windows driver will work. Look for explicit support for that architecture.

On a Mac, open Apple menu > About This Mac. Record the macOS version and whether the computer shows an Apple chip or an Intel processor.

Driver source by setup situation

Your setupBest driver sourceCheck before you download
Windows 10 or 11, printer on USB or Wi-FiWindows Update or Add deviceWindows version and 32-bit or 64-bit system type
Windows cannot find a driverManufacturer’s Australian support siteExact model number on the printer label, not a similar model
Mac with an AirPrint-capable printerBuilt-in AirPrint or macOS class driverPrinter listed in Apple’s macOS compatibility guidance
Mac with an older printer and no AirPrintManufacturer package for your macOS versionApple silicon or Intel support on the vendor page
Small-office shared printerDriver deployed by the network administratorWho holds administrator rights and the shared queue name
Printer older than your operating systemLegacy driver from the manufacturerWhether the vendor still supports your Windows or macOS version

Choose the smallest supported package that provides the functions you need. A printing driver may be enough for documents; scanning, maintenance tools or specialist finishing options may require additional manufacturer software.

Download rule: Use the manufacturer, Microsoft or Apple. Skip generic driver updater tools, even when they promise to identify the printer automatically.

How to Install a Printer Driver on Windows

Start with Windows’ built-in installation route rather than downloading a large software bundle. For an existing printer that won’t respond, Microsoft recommends removing and adding the printer again, allowing Windows to retrieve the appropriate driver.

The settings route below shows the basic repair sequence.

A three-step infographic showing how to install a printer driver on Windows through system settings.

Let Windows handle the installation first

  1. Open the printer settings. In Windows 11, go to Start > Settings > Bluetooth & devices > Printers & scanners. In Windows 10, use Settings > Devices > Printers & scanners; leave a new USB printer disconnected if its manufacturer’s instructions say to connect it during setup.

  2. Remove the broken queue, if one exists. Select the affected printer, choose Remove or Remove device, and wait for the list to refresh. This clears the existing queue configuration, although it doesn’t necessarily delete the underlying driver package.

  3. Add the printer again. Select Add device, or Add a printer or scanner, and let Windows search. Choose the matching printer and allow installation to finish before sending a document.

  4. Try Device Manager if no suitable driver appears. Open Start > Device Manager, expand Print queues or the relevant printer category, right-click the device and select Update driver > Search automatically for drivers. An unidentified printer may appear under Other devices instead.

  5. Use the official manufacturer download if automatic detection fails. Check the publisher and signature before running it, then follow the manufacturer’s installation instructions. For an extracted driver package, choose Have Disk in the manual add-printer wizard and browse to its INF file, not the downloaded executable.

  6. Test the installed queue. Open the printer’s Printer properties, select Print Test Page, and check paper size, colour mode and duplex options. Make sure the queue name identifies the model you recorded, rather than leaving several indistinguishable copies.

When the manual route makes sense

The Have Disk option is for driver files already downloaded or supplied on installation media. Windows Update is another option within the printer-selection process; Microsoft’s connection and printing troubleshooting guide also describes automatic driver searches through Device Manager.

If the download is a ZIP archive, extract it before browsing for the INF file. If it’s a manufacturer installer, use its setup wizard unless the vendor provides separate manual-installation instructions.

For the older menu layout, follow this Windows 10 printer setup walkthrough. Don’t replace the printer or reset the whole computer because automatic driver detection fails.

Fix a Printer That Shows Up but Won’t Print

Visibility doesn’t prove the printing connection works. A computer can discover a printer yet send jobs to the wrong queue, use an unsuitable protocol or lack permission to access a shared printer.

Australia’s government printing guidance distinguishes connectivity from driver availability and describes central deployment through Microsoft Intune or Endpoint Configuration Manager. That distinction matters at home too: reinstalling software won’t repair an isolated guest network or an authentication failure.

Separate the fault before changing software

Start at the printer. Confirm it’s powered on, has paper, shows no jam or consumable error, and is connected to the intended network.

Then compare devices. If another computer prints successfully, investigate the failing computer’s queue, driver architecture and permissions. If every device fails, inspect the printer and network before changing each computer.

Use this decision path:

  • USB connection fails: Check the cable and USB port first, then the driver and queue. Avoid diagnosing it as a driver fault until the computer detects the device reliably.
  • Wi-Fi discovery fails: Check the network and guest isolation. Use the address shown on the printer’s network configuration page to add it manually.
  • Discovery works, but jobs fail after manual addition: Confirm the address and supported print protocol, such as IPP or IPPS.
  • The Print Spooler repeatedly stops: Investigate an obsolete, incompatible or unsigned driver rather than repeatedly restarting the service.

Symptoms, causes and fixes for installed printers

SymptomLikely causeFix
Printer shows as installed but prints nothingDamaged or wrong print queueRemove the printer, restart, then add it again
Windows cannot find a driverNo Windows Update driver for this modelUse Have Disk with the manufacturer download
Garbled pagesDriver for a similar model or wrong 32-bit or 64-bit buildReinstall the driver for the exact model and system type
Printer visible but jobs failProtocol mismatch or changed IP addressAdd the printer by IP address and confirm the same network
Mac cannot find the printerGuest network isolation or different subnetJoin the same network, disable isolation, then add by IP
Print spooler stops repeatedlyOld or unsigned driverRemove the old driver and install the current signed driver

A basic class driver may print documents but omit model-specific controls. If duplex or finishing options are missing, check the printer’s installed accessories and driver settings before replacing it with the manufacturer package.

For an offline status specifically, 247TechTeam’s explanation of why Windows shows printer offline helps distinguish status and connection problems. For HP-specific checks, use this HP printer troubleshooting guide.

A successful repair means the test page prints completely and another document follows without restarting the computer or printer.

How to Set Up a Printer on macOS Without Extra Downloads

Check AirPrint before installing a vendor package. Apple’s Australian macOS compatibility guidance identifies AirPrint and built-in class drivers as ways supported printers can work without additional software downloads.

Be especially cautious with an older installer on an Apple silicon Mac. An Intel-only or obsolete package may not support your current system; AirPrint is the cleaner starting point when you don’t need specialist manufacturer features.

The printer should appear in macOS settings once the network connection is ready.

A digital illustration showing a computer screen with printer settings and a wireless printer on a desk.

Add the printer using built-in support

  1. Connect power and networking. Join the printer to the same Wi-Fi or wired network as the Mac so they can communicate locally.
  2. Open System Settings > Printers & Scanners. macOS manages printer queues here.
  3. Select Add Printer, Scanner or Fax. Wait for discovery to complete rather than immediately downloading software.
  4. Choose the matching printer. Check the Use menu for AirPrint or the suggested compatible driver.
  5. Select Add and wait for the queue to appear. Don’t create another copy while setup is still running.
  6. Check the output and available controls. Print a test page or short document, then inspect paper size, duplex printing, colour mode and ink or toner information where supported.

If the printer doesn’t appear

Confirm the Mac and printer share a subnet, not merely a similar network name. Guest Wi-Fi can allow internet access while blocking communication between devices; move both devices onto the trusted network rather than weakening a guest network unnecessarily.

Restart the printer and Mac, then try discovery again. If necessary, record the printer’s network address and add it through the IP tab using a supported protocol.

Resetting the macOS printing system removes existing queues, so reserve that for persistent queue problems. If you need scanning or maintenance utilities, check the manufacturer’s Australian support page for your exact macOS version and chip support before installing them.

Install Drivers Safely on Home and Small-Office Networks

The fastest installation isn’t automatically the safest. A printer driver is privileged software, and approving an installer gives it more access than an ordinary document.

The Australian Cyber Security Centre’s Windows hardening guidance warns about malicious printer drivers and Windows Print Spooler exploitation. It recommends controlling installation, validating driver signatures, restricting installation to administrators and preventing driver downloads over unencrypted HTTP.

Use this checklist before approving a download or permission prompt.

A five-step infographic guide on how to safely install printer and device drivers on computers.

Check trust and permissions before installation

  • Confirm the website. Download over HTTPS from the manufacturer, Microsoft or Apple. A padlock alone doesn’t establish that a site belongs to the manufacturer.
  • Inspect the signature. On Windows, right-click the installer, open Properties > Digital Signatures, select the signer and inspect Details. Stop if validation fails or the publisher is unexpected; some extracted driver packages use signed catalogue files rather than a signed installer.
  • Keep daily work unprivileged. Use a standard account normally, supplying administrator credentials only when a verified installation requires them. Don’t bypass workplace restrictions.
  • Retire unused software carefully. Remove duplicate queues, then remove unused driver packages only after checking no active printer needs them. Deleting a queue alone doesn’t remove its driver.
  • Limit sharing and deployment. Give shared queues clear names and restrict access to intended users. In a small office, nominate an administrator to standardise models and deploy approved drivers through a central management tool.

Never disable signature checks just to make an old printer package install.

The video provides an additional visual reference for installation.

For connection-specific preparation, this Epson printer Wi-Fi setup guide can help separate wireless setup from software installation. Where the printer supports IPPS, enable encrypted printing with a valid certificate configuration rather than relying on an unencrypted connection.

Decide Whether to Fix It Yourself or Call a Technician

Keep going yourself when the printer is discovered, installation completes without security warnings, and documents print normally after reinstalling the queue. You don’t need to keep changing settings once the functions you use work.

Stop when the same fault returns despite a clean installation. Repeated Print Spooler failures, unknown-publisher warnings, unsigned-driver prompts or printing failures across the household deserve diagnosis rather than another download.

Bring useful information, not another installer

Before arranging help, gather:

  • Printer identification: Manufacturer and full model from the label.
  • Computer details: Windows or macOS version and processor architecture.
  • Connection method: USB, Wi-Fi, Ethernet or a shared printer.
  • Exact symptoms: Copy the error message and note whether jobs disappear, remain queued or print incorrectly.
  • Work already attempted: Record which driver you installed and whether other devices can print.

That information helps distinguish a computer repair issue from a printer or network fault. Don’t send passwords or administrator credentials with your notes, and don’t grant remote access to someone who contacts you unexpectedly about a driver problem.

Computer Daddy is a mobile, on-site computer repair and IT support business serving Bayside, Port Phillip and Kingston in South East Melbourne. Our Printer Setup service covers cables and software for new or existing printers, so you don’t have to work out which part of the connection is failing before asking for help.

We identify the issue first and recommend solutions that suit the fault and your budget. We also explain what’s wrong and what it will cost before starting work.

The decision rule is straightforward: continue when each change produces a clear improvement; get help when you’re repeating the same installation, facing security warnings or disrupting other working devices. If you’re uncomfortable interpreting a permission prompt, leave it unapproved until it can be checked.


Computer Daddy offers practical, in-home help with printer setup, driver installation and the network connections that make printing work. Visit Computer Daddy and share your printer model, computer’s operating system and exact error message so we can help you choose a practical next step.

Scroll to Top